Access point settings
You only need to configure the access point settings manually if the
automatic MMS settings of the camera do not function, and your
operator does not support sending the settings over the air.
An MMS access point contains all the needed MMS settings. To create a
new MMS access point for the camera, start the text message with
40, and then add the following settings to the message:
• 1
connection name
• 2
access point name
• 3
user name for the access point connection
• 4
password for the access point connection
• 5
access point home page address
• 6
1 (normal connection authentication) or 6
2 (secure
connection authentication)
• 7
1 (connection security on) or 7
0 (connection security off)
• 8
1 (temporary session mode) or 8
2 (permanent session mode)
• 9
IP address of the camera or 9
0 if you want the camera to
select the IP address automatically
• 10
IP address of the primary name server
• 11
IP address of the secondary name server
• 12
IP address of the proxy server
C o n f i g u r e t h e s e t t i n g s
49
Copyright © 2005 Nokia. All rights reserved.
• 13
number of the proxy port
Example:
The connection name, access point name, user name, and the
password cannot contain any spaces.
If you do not need to configure a setting for the access point, leave
the number of this setting out from the message. For example, if you
do not need to enter your user name and password, leave them out.
Example:
To modify any of the access point settings, start the text message
with 41, enter the number of the access point on the access point list,
and write the rest of the text message. For example, to edit the
connection name, send the following text message to the camera:
41
access point number
1
new connection name
Example:
Now the camera sets MMS as the name of the connection for the
second access point on the access point list.
To obtain a list of defined access points, send the following text
message to the camera:
40 1 home 2 operator
3 helenmill 4 4321 5
http://mms.operator.fi
6 2 7 1 8 1 9 0 10
123.145.167.189
40 1 home 2 operator
5 http://
mms.operator.fi 6 2 7
1 8 1 9 0 10
123.145.167.189
41 2 1 MMS
C o n f i g u r e t h e s e t t i n g s
50
Copyright © 2005 Nokia. All rights reserved.
40
?
To remove an access point from the list, send the following text
message to the camera:
40
0
number of access point on the list
Example:
Now the camera removes the access point that is third on the list.
To check the settings of an access point, send the following text
message to the camera:
40
?
number of access point on the list
To set an access point for MMS messaging, send the following text
message to the camera:
42
number of access point on the list
To check the current MMS access point, send the following text
message to the camera:
42
?
To set an access point for SMTP messaging, send the following text
message to the camera:
43
number of access point on the list
To check the current SMTP access point, send the following text
message to the camera:
43
?
Tip:If you are using Remote Camera Manager, select Settings >
Connection. To see the current camera connection settings,
select for example MMS settings > Options > Get current
settings.
40 0 3
C o n f i g u r e t h e s e t t i n g s
51
Copyright © 2005 Nokia. All rights reserved.