PIN code settings
To change the PIN code of the SIM card in the camera, send the
following text message to the camera:
34
old PIN code
new PIN code
new PIN code
Example:
The master user can set the camera to query for the PIN code of the SIM
card in the camera each time the camera is switched on. When the PIN
code query is on, the SIM card is secure, and its use in other GSM devices
is disabled.
You only need to enter the PIN code manually during the first start-up.
The camera stores the PIN code in its memory, and uses it automatically
in later start-ups.
To set on the PIN code query, send the following text message to the
camera:
35
PIN code
1
34 1234 4321 4321
C o n f i g u r e t h e s e t t i n g s
47
Copyright © 2005 Nokia. All rights reserved.
Example:
To set off the PIN code query, send the following text message to the
camera:
35
PIN code
0
To check whether the PIN code query is on, send the following text
message to the camera:
35
PIN code
?
Example:
Tip: If you are using Remote Camera Manager, select Settings >
Security.